Safety Information - Renkforce IP65 Bedienungsanleitung

5. Safety Information

Read the operating instructions attentively and particularly observe the safety
notes. If the safety notes and the information in these operating instructions
regarding proper handling are not observed, we assume no liability for any
resulting injury/property damage. In such cases, the warranty/guarantee will
also lapse.
• The code lock must only be operated with a stabilised direct voltage at 12 V/DC.
• The product is not a toy. Keep it away from children and pets.
• Do not leave packaging material lying around carelessly. It may become a dangerous
toy for children.
• The product is suitable for indoor and outdoor use (IP65). However, it must never be
operated in or under water; it would be destroyed by this.
• Never exceed the contact resilience indicated in the chapter "Technical Data" for the
two outputs.
Never switch, e.g., the mains voltage with the code lock. This causes danger from
electrical shock!
• Ensure that the connection cable is not crushed, bent or damaged by sharp edges.
• Protect the product from extreme temperatures, flammable gases, vapours and
solvents.
• Handle the product with care. Impact, blows or falls from even a low height will
damage the product.
• Do not expose the product to mechanical stress.
• Also observe the safety notes and operating instructions of the other devices to which
the product is connected.
• When secure operation is no longer possible, shut off the product and protect it from
inadvertent use. Secure operation is no longer warranted if the product:
- has visible damage,
- no longer works properly,
- was stored under detrimental ambience conditions for an extended period or
- was subjected to considerable transport strain.
66