Renkforce IP65 Bedienungsanleitung Seite 95

1. Example: Programming visitor code with one-time code
If the visitor enters his (valid) visitor code, output #1 will switch; the visitor code is then
rendered invalid and stops working.
The visitor can only gain access once.
(a) (b)
(a) Start programming for visitor code
(b) Visitor-ID "01" (possible: "01" to "50" for max. 50 different visitors)
(c) Code "00" means programming of a one-time code
(d) Visitor code, e.g. "1268"
(e) Save programming (code lock emits two beeps)
2. Example: Programmeing a visitor code with time limit
The visitor code programmed by you is valid for a specific duration (1 - 99 hours).
Afterwards, the code will automatically become invalid and stop working.
The visitor can activate output #1 like a normal user during the programmed period.
(a) (b)
(a) Start programming for visitor code
(b) Visitor-ID "02" (possible: "01" to "50" for max. 50 different visitors)
(c) Period "03" = Validity duration in hours (possible: "01" to "99" hours)
(d) Visitor code, e.g. "1378"
(e) Save data (code lock emits two beeps)
3. Example: Deleting individual visitor code
(a) (b)
(a) Start programming for visitor code
(b) Visitor-ID "02" (possible: "01" to "50" for max. 50 different visitors)
(c) Perform deletion (code lock emits two beeps)
(c) (d)
(c) (d)
(c)
(e)
(e)
95