Renkforce IP65 Bedienungsanleitung Seite 73

• Insert the plug of the enclosed connection cable in the corresponding socket (13) on the PCB
of the code lock.
The plug fits only in one direction. The two little tabs must be in the corresponding
notches of the socket on the PCB. Do not apply any force when plugging in!
• Place the code lock on the mounting plate from above. Two tabs in the housing of the code
lock engage with the corresponding openings in the mounting plate. Ensure that the cable is
not crushed.
• Use the attachment screw (10) to fasten the code lock on the mounting plate.
73