Renkforce IP65 Bedienungsanleitung Seite 88

2. Example: Access via user code
(a) (b)
(a) Output #1 is to be switched
(b) Access only via user code
(c) Memory slot number "000" (output #1 can use: 000 - 999)
(d) User code "1111"
(e) Save programming (code lock emits two beeps)
(a) (b)
(a) Output #2 is to be switched
(b) Access only via transponder
(c) Memory slot number "027" (output #2 can use: 001 - 100)
(d) User code "2222"
(e) Save programming (code lock emits two beeps)
While the code lock is in regular operation (not in programming mode!), output #1 or
#2 (depending on programming) is switched by entering the user code and pushing
the crosshatch button.
If you switch on the "Auto-Entry" function (see chapter 11. m), you do not need to push
the crosshatch button
after input of a correct user code.
88
(c) (d)
(c) (d)
. The code lock will switch the corresponding output at once
(e)
(e)