cecotec BOLERO DRESSCODE 9155 INVERTER Bedienungsanleitung Seite 93

No water inlet
- Is the water supply tap open?
- Is the inlet hose frozen?
- Are the filters blocked or dirty?
- Is there sufficient water pressure?
Water inlet at half
If the water level is low, the appliance will automatically supply water.
Water comes out when washing
Check if you added detergent with too much foam or too much quantity.
Remaining time change
If the laundry is not evenly placed inside the drum when spinning, the spin time will be
increased, in order to even out the imbalance and correct the deviation.
There is an abnormal noise when spinning
Have the transport bolts been removed?
Are there pieces of metal or coins in the drum?
Washing machine cannot work after a power failure
The washing machine will stop working after a power failure. When power is restored, for
safety reasons, it will not start up. Press the power button and restart the programme.
Troubleshooting Guide
Incident POSSIBLE CAUSE
The washing It is not plugged in.
machine
You have not pressed the Start/Pause
does not
button.
switch on
Power outage
Blown fuse
TROUBLESHOOTING
Plug it in
Press the Start/Pause button.
Check the power supply
Activate the differential of
your electrical panel
BOLERO DRESSCODE 9155 INVERTER
BOLERO DRESSCODE 9155 INVERTER STEEL
ENGLISH
93