cecotec BOLERO DRESSCODE 9155 INVERTER Bedienungsanleitung Seite 81

7. Temperature button
You can select different temperatures depending on the type of fabric and the soiling degree
of the items to be washed.
Press the Temperature button repeatedly to select the desired option.
You must select this function after selecting a washing programme on the knob and before
pressing the Start/Pause button.
8. Drum Clean function
It is advisable to periodically clean, sterilise and disinfect the drum.
To do this, press the Temperature button for more than 3 seconds.
NOTE: the drum must be empty to perform this function and no detergent or softener should
be poured into the drawer.
9. Programmes knob
Turn the knob to choose one of the 12 washing programmes according to the type of fabric
and the degree of soiling of the laundry.
Special functions
Add or remove garments (Stop function&Go)
If you want to add laundry during a washing cycle, press the Start/Pause button to stop
operation.
After about 5 seconds*, you will hear an unlocking sound, while the door lock indicator light
on the display disappears, then you can open the door.
NOTE*: the time may vary depending on multiple factors.
Add the additional garment inside the drum.
Do not force the door while opening it, as you may damage it. If there is water inside the
appliance while you are opening the door, water may spill out of the washing machine.
Exercise extreme caution. RISK OF BURNS.
If the water temperature is above 45 °C and there is a lot of water inside the drum, the door
will not open for safety reasons. If you want to open the door, follow the instructions below:
1. Press the Start/Pause button (wait until the drum stops turning).
2. Wait until the water temperature cools down to less than 45 °C.
3. If you want to open the door when the water temperature is above 45 °C, turn off the
appliance and open the door after about 5 minutes. Exercise extreme caution. RISK OF
BURNS.
BOLERO DRESSCODE 9155 INVERTER
BOLERO DRESSCODE 9155 INVERTER STEEL
ENGLISH
81