1. Preparing for the washing cycle.
-
Open the door, put the laundry in and close the door.
-
Open the detergent drawer and add detergent/softener (if applicable) and then close
it.
-
Make sure that the hose connections are correct and that the tap is open.
2. Press the power button.
3. Turn the knob to choose the Rinse&Spin programme.
-
The washing programme will be selected automatically.
4. Press the Start/Pause button to start the rinse and spin cycle.
5. When the programme is finished, the appliance will beep.
-
The highest spin speed can be selected, but the temperature cannot be adjusted.
Spin programme
The machine does not wash or rinse, it will only spin.
1. Preparing for the washing cycle.
-
Open the door, put the laundry in and close the door.
-
Make sure that the hose connections are correct and that the tap is open.
2. Press the power button.
3. Turn the knob to choose the Spin programme.
-
The washing programme will be selected automatically.
4. Press the Start/Pause button to start the spin cycle.
5. When the programme is finished, the appliance will beep.
-
The highest spin speed can be selected, but the temperature cannot be adjusted.
-
During the spin process, the actual spin speed may not match the programme speed,
which is due to the fact that the appliance adjusts the speed according to the weight of
the laundry.
-
There may be a rhythmic buzzing noise during the spin process, which is the normal noise
of the drain. This is not a fault of the washing machine.
NOTE:
-
If you want to change the current setting during the washing cycle, first press the Start/
Pause button to stop the cycle temporarily, change the settings and then press the
button again to restart (not available for all programmes).
-
washing programmes may vary depending on the washing machine model.
-
some functions, such as spin speed and temperature, are not configurable in certain
programmes.
BOLERO DRESSCODE 9155 INVERTER
BOLERO DRESSCODE 9155 INVERTER STEEL
ENGLISH
87