Notes To Users; General Precautions; Precautions; Installation - Magnescale Mj632 Bedienungsanleitung

1. Notes to Users

1-1.

General Precautions

When using Magnescale Co., Ltd. products, observe the following general precautions
along with those given specifi cally in this manual to ensure proper use of the products.
• Before and during operations, be sure to check that our products function properly.
• Provide adequate safety measures to prevent damages in case our products should
develop malfunctions.
• Use outside indicated specifi cations or purposes and modifi cation of our products will
void any warranty of the functions and performance as specifi ed of our products.
• When using our products in combination with other equipment, the functions and
performances as noted in this manual may not be attained, depending on operating
and environmental conditions.

1-2. Precautions

When installing the MJ632, observe the following precautions to prevent noise interference
from other equipment.
• Use noise-preventive mechanisms for the relays, solenoids and motors connected to
the MJ632.
• Take preventive steps when noise from other equipment may disturb the power supply
line to the units.
• Shield the output cable correctly according to the instruction manual.
Be sure to ground the MJ632 with an earth wire or by mounting it on the machine with
screws.

1-3. Installation

• Use the MJ632 in the temperature range of 0 to 45 °C. Do not expose it to sunlight or
sources of heat. A well-ventilated place is preferable.
• Separately route the head cable and output cable from the power line.
• When installing the Interpolator in a place where it may be exposed to water splashes,
protect it from water by providing a cover or other protection.
MJ632
1
(E)