Safety Precautions
Magnescale Co., Ltd. products are designed in full consideration of safety. However,
improper handling during operation or installation is dangerous and may lead to fi re,
electric shock or other accidents resulting in serious injury or death. In addition, these
actions may also worsen machine performance.
Th erefore, be sure to observe the following safety precautions in order to prevent these
types of accidents, and to read these "Safety Precautions" before operating, installing,
maintaining, inspecting, repairing or otherwise working on this unit.
Warning Indication Meanings
Th e following indications are used throughout this manual, and their contents should be
understood before reading the text.
Warning
Caution
Symbols requiring attention
CAUTION ELECTRICAL
SHOCK
Warning
• Do not use this unit with voltages other than the specifi ed supply voltage as
this may result in fi re or electric shock.
• Do not perform installation work with wet hands as this may result in electric
shock.
• Do not disassemble or modify the unit as this may result in injury or damage
the internal circuits.
Caution
• Be sure to check the machine and device conditions to ensure work safety
before working on the machine.
• Be sure to cut off the power supply and other sources of drive power before
installing the working on the machine. Failure to do so may result in fi re or
accidents.
• When turning on the power supply, etc. to operate the machine, take care not
to catch your fi ngers in peripheral machines and devices.
MJ632
Failure to observe these precautions may lead to fi re, electric shock
or other accidents resulting in serious injury or death.
Failure to observe these precautions may lead to electric shock
or other accidents resulting in injury or damage to surrounding
objects.
Symbols prohibiting actions
FINGER
DO NOT
JAM
DISASSEMBLE
Failing to follow the precaution items given below may
lead to severeinjury or death.
Failing to follow the precaution items given below may
lead to injury or damage to surrounding objects.
Symbols specifying actions
UNPLUGGING
(E)
(1)