B) Programming The Special Functions - Reely 23 72 14 Bedienungsanleitung

b) Programming the Special Functions

The speed controller is already programmed in the factory with the best pre-settings. Usually, no changes
are required for the first attempts at driving.
56
The speed controller unit has many different programming
options, e.g. adjustment of the braking strength, a low-volt-
age protection function for LiPo rechargeable batteries and
much more.
The values marked grey in the table are the settings pre-
programmed ex works (at the time these operating instruc-
tions were written). However, these may change for later
versions of the speed controller.
The function (see "Function" column in the table to the left)
currently selected for settings is always indicated by the
green LED.
The value selected is indicated by the red LED (see right
area of the table).
The following pages explain how to activate the program-
ming mode and how to make settings; they also describe
all the functions.