Reely 23 72 14 Bedienungsanleitung Seite 51

Setting Rear Axle Camber:
For setting the camber, turn the upper trans-
verse link (A).
Because the upper transverse link has a left
and right hand thread at either end, the trans-
verse link does not need to be dismantled for
the camber to be adjusted
A
In the axle spur (B) and the dampener bridge
C
(C), there are several more suspension points B
for the upper transverse link. When the wheel
rebounds, the camber changes depending on
the installation position (e.g. stronger camber
when the wheel is pushed in).
51