Activating/Deactivating Run-On Function - Abicor Binzel Xfume Commander Originalbetriebsanleitung

8 Operation
Keep the rotary/push button pressed to
5.
change to the main menu.
8.6

Activating/Deactivating Run-On Function

When the run-on function is activated, extraction continues running for up to 60 seconds after the
welding process has stopped.
Keep the rotary/push button pressed until
1.
the menu <Settings> appears.
Turn the rotary/push button until the menu
2.
<Postflow> is selected (light pink border).
Press the rotary/push button to select the
3.
menu <Postflow> (magenta-colored
border).
Set the value for run-on time in seconds by
4.
turning the rotary/push button. To
deactivate the run-on function, set the value
to "0".
Keep the rotary/push button pressed to
5.
change to the main menu.
EN - 66
®
xFUME COMMANDER
BAL.1122.0 • V01