SKF FlowMaster II Montageanleitung Und Einbauerklärung Seite 4

TEL: +1 (314) 679-4200 FAX: +1 (314) 679-4367
Authorized to compile the technical file:
EMAIL: robert collins@skf com WEBSITE:
This U K Declaration of Incorporation is
issued under sole responsibility of the
manufacturer Lincoln Industrial
Corporation hereby declares that the
partly completed machinery stated
below:
Product:
FlowMaster II pump and reservoir
Model number(s):
85783 and 85783MSO
Designation:
Rotary-driven hydraulic pump (series A)
Year of CE: 2024
in its intended use, is in conformity with
the relevant union harmonization
legislation:
Supply of Machinery (Safety)
Regulations 2008 (2008 No 1597)
along with the following Directive(s)
that were also applied with the above
legislation:
I, the undersigned of Lincoln Industrial Corporation, hereby declare that the equipment specified above, in its intended use,
conforms with the Essential Health and Safety Requirements of U K legislation Supply of Machinery (Safety) Regulations 2008
No 1597 Annex I, Declaration of Incorporation by the time of placing it on the market
___________________________________
Robert Collins
Technical Compliance Manager
St Louis, MO, U S A
2024/02/12
U K Declaration of Incorporation
Manufacturer name/address:
Lincoln Industrial Corporation
5148 N Hanley Road
St Louis, MO 63134 U S A
SKF (U.K.) Limited
2 Canada Close
Banbury, Oxfordshire, OX16 2RT, GBR
EN ISO 4413: 2010
Hydraulic fluid power – General rules
and safety requirements for systems
and their components
EN ISO 12100: 2010
Safety of machinery- General
principles for design Risk
assessment and risk reduction
EN ISO 809: 2012
Pumps and pump units for liquids -
common safety requirements
EN 12162: 2009
Liquid pumps - safety requirements
Procedure for hydrostatic testing
EN 349: 1993
Safety of machinery - minimum gaps
to avoid crushing of parts of the
human body
The following EHSR (Essential Health
and Safety Requirements) have been
applied:
www skf com
1 1 2a – 1 1 2b – 1 1 2c – 1 1 3 – 1 1 5
– 1 2 2 – 1 2 5 – 1 3 2 – 1 3 3 – 1 3 4 –
1 3 6 – 1 3 7 – 1 3 8 – 1 5 3 – 1 5 4 –
1 7 1 – 1 7 1 1 – 1 7 3 – 1 7 4
The manufacturer maintains a technical
file summary sheet containing test
reports and product documentation:
Technical file summary sheet
number: RA404554-00
The partly completed machinery shown
above should not be put into service
until the final machinery into which it is
to be incorporated has been declared in
conformity with the provisions of the
directive, where appropriate.
4
DOCUMENT NUMBER
UK404579CA