Checking The Clutch; Cleaning The Spark Plug; Transport; Transport Over Shorter Distances - Zipper Zi-Rpe60 Betriebsanleitung

17.5.4

Checking the clutch

Check the clutch at the same time as the V-belt. With the belt removed, visually check the outside
for seizure and the "V" groove for wear and damage. Clean the V-groove as required. If the clutch
shoe is worn, the power transmission becomes insufficient.
17.6

Cleaning the spark plug

Pull out the spark plug cap and remove impurities from the outside of the spark plug.
Unscrew the spark plug using the spark plug wrench.
Check the ceramic insulation, clean the electrodes (metal tips) and check the distance
between the contacts. It should be 0.7 to 0.8 mm.
Reinstall the cleaned (or replaced) spark plug and replace the spark plug cap.
18

TRANSPORT

Never lift or transport the machine with the engine running!
18.1

Transport over shorter distances

For transport over short distances, use the hand holder and the mounted transport wheels:
18.2

Lifting and transporting with separate devices

There are two persons required to lift and park the machine on another transporting
devices. - one person to operate the hoist and one person to keep the machine in
balance.
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-RPE60_ZI-RPE90
W A R N I N G
Release the transport wheels from the rubber holder and
support the wheel axle on the ground.
Pull the machine backwards until the base plate rests
on the rubber supports of the wheel suspension.
Press the handle vertically until the centre of gravity
of
Move the machine only on level and firm ground.
N O T E
When transporting over long distances, fold the
handle forward as far as possible (see illustration on
the left).
Ensure that the lifting equipment, including
accessories, is suitable for loads greater than 90 kg.
Before lifting, check the weld on the lifting ring and
the fixing of the lifting frame.
First lift the machine only a few centimetres to check
the load capacity.
Then lift the machine as gently as possible into the
desired position.
Secure the load properly for transport.
TRANSPORT
39