Hazardous Situations; Assembly; Check Scope Of Delivery; Assemble - Zipper Zi-Rpe60 Betriebsanleitung


Do not carry out an ignition spark test on engines if the engine is flooded or gas can be
smelled. A stray spark could ignite the vapours.

Do not use fuel to clean machine parts, especially indoors. Vapours from fuels may explode.

Always keep the area around the muffler free of foreign substances such as leaves, paper,
cardboard, etc. A hot muffler could ignite these substances and cause a fire.

Close the filler cap after refuelling.
 Check the fuel line and tank regularly for leaks and cracks. Do not operate the machine if
leaks in the fuel system are known.
 Store fuel only in designated and approved containers.
14.6

Hazardous situations

Despite intended use, certain residual risks remain. Due to the design and construction of the
machine, hazardous situations may occur which are identified as follows in these operating
instructions:
A safety instruction designed in this way indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
A safety instruction designed in this way indicates a potentially hazardous situation
which, if not avoided, could result in death or serious injury.
A safety instruction designed in this way indicates a possibly hazardous situation
which, if not avoided, may result in minor or moderate injury.
A safety notice designed in this way indicates a potentially hazardous situation which,
if not avoided, may result in property damage.
Regardless of all safety regulations, your common sense and your appropriate technical
aptitude/training are and remain the most important safety factors in the error-free operation of
the machine. Safe working depends on you!
15

ASSEMBLY

15.1

Check scope of delivery

After delivery, check the machine immediately for transport damage and missing Parts.
15.2

Assemble

The machine is delivered pre-assembled. The parts that have been dismantled for transport must
be assembled before commissioning / use.
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-RPE60_ZI-RPE90
D A N G E R
W A R N I N G
C A U T I O N
N O T E

Connect the two parts of the retaining bracket (1) (only
for ZI-RPE60).
ASSEMBLY
31