Scheppach KS1200 Originalbetriebsanleitung Seite 26

Warning! This power tool generates an electro-
magnetic field during operation. This field can impair
active or passive medical implants under certain cir-
cumstances. In order to prevent the risk of serious
or deadly injuries, we recommend that persons with
medical implants consult with their physician and the
manufacturer of the medical implant prior to operating
the power tool.
ATTENTION: Depending on how you use the power
tool, the actual values may differ from the stated val-
ues. Implement measures to protect against noise nui-
sance. During this process, it is important to consider
the entire operating sequence. This also includes mo-
ments when the power tool is working without a load
and moments when it is switched off.
Suitable measures include, among other things, reg-
ular maintenance and servicing of the power tool and
tool attachments, regular breaks and appropriate plan-
ning of operations.
The specified vibration emission value can be used to
compare one power tool with other.
Residual risks
Even when this power tool is operated properly,
residual risks still remain. The following hazards
may arise in connection with the design and con-
struction of this power tool:
• Lung damage if suitable dust protection mask is
not worn.
• Hearing damage if suitable hearing protection is
not worn.
• Damage to health resulting from hand/arm vibration
if the device is used over an extended period of
time or if it is not properly operated and maintained.
6. Technical data
Rated voltage
Power consumption
Idle speed
Adjustment angle
Grinding disc Ø (inner)
Grinding disc Ø (outer)
Grinding disc thickness
Protective insulation
Weight
26 | GB
Noise level
The noise levels have been determined in accordance
with EN 61029.
Sound pressure level L
Uncertainty K
Sound power level L
Uncertainty K
Wear hearing protection.
Exposure to noise can cause hearing loss.
Total vibration emission values (vector sum of three
directions) determined per EN 61029.
Sanding
Vibration emission value ah
Uncertainty K
Warning!
The vibration emission value specified has been meas-
ured in accordance with a standardised test procedure
and may change depending on the type and manner
in which the power tool is used and may be above the
specified value in exceptional cases.
The specified vibration emission value can be used to
compare one power tool with other.
The specified vibration emission value can also be
used for an initial assessment of the impairment.
Keep the noise level and vibration to a minimum!
• Only use faultless devices.
• Maintain and clean the device at regular intervals.
• Adapt your working methods to the device.
• Do not overload the device.
• Have the device checked if necessary.
230 V~ / 50 Hz
• Switch the device off if it is not in use.
220 W
7.
7500 rpm
35° - 0° - 35°
To ensure that the machine works properly, follow the
10 mm
notes in this manual.
You still need to do the following:
100 mm
• Fit the turntable
3.2 mm
• Securely set up the device
II
1.8 kg
www.scheppach.com
pA
pA
WA
WA
Preparing for commissioning
87 dB
3 dB
100 dB
3 dB
= 3.73 m/s²
= 1.5 m/s²