• Do not repackage concentrator, accessories,
or systems for shipment in packaging not
provided by Inogen.
• Do not jump start the automobile with the
DC power cord connected. This may lead to
voltage spikes which could shut down and/or
damage the device.
• Do not leave the device in an environment
which can reach high temperatures, such
as an unoccupied car in high temperature
environments.
• Do not touch the recessed electrical contacts
of the External Battery Charger; damage to
contacts may affect charger operation.
• The device should be kept dry at all times.
Exposure to water could lead to electrical
shock and/ or damage.
• For optimal sieve bed (columns) life, the
product should be used frequently.
• The device's battery acts as a secondary
power supply in the event of a planned or
unexpected loss of the external power supply.
Even when operating the device from an
external power supply, a properly inserted
battery should be maintained in the unit. Doing
so will minimize the risk of interrupting opera-
tion and will keep alarms functioning.
©2024 Inogen, Inc. All rights reserved.
• The power supply should be placed in a
well-ventilated location as it relies on air
circulation for heat dissipation. The power
supply may become hot during operation; if this
happens, allow to cool down before handling to
avoid injury.
• Ensure the automobile power socket is clean
and the adapter plug fits properly, otherwise
overheating may occur.
• Ensure that the automobile power socket is
adequately fused for the device power
requirement (minimum 15Amp). If the power
socket cannot support a 15Amp load, the fuse
may blow, or the socket may be damaged.
• When powering the device in an automobile,
ensure the vehicle's engine is running first
before connecting DC power cord into DC
auxiliary outlet. Operating the device without
the engine running may drain the vehicle's
battery.
• A change in altitude (for example, from sea
level to mountains) may affect total oxygen
available to the patient. Consult your physician
before traveling to higher or lower altitudes to
determine if your flow setting should be
changed.
Page 8 of 272
96-13613-00-01 A