Battery Care And Maintenance - Inogen Rove 6 Benutzerhandbuch

12. Insert the new columns into the device immediately after removing the dust caps.
DO NOT leave the column ends exposed.
6
13. Push the columns until the latch makes an
audible click and returns to the closed
position.
14. Push and fold metal pull handle flush to bottom
of columns.
IMPORTANT: You need to notify the device that
you have replaced the columns. This can be done
through the device itself or through the Inogen
Connect App.
15. Resetting the columns through the device
a. Connect the device to AC power but DO NOT
power on the device.
b. Press and hold the plus (+) and (-) minus
button for 5 seconds. The screen will display
the 'sieve reset' informational icon.
c. Release the buttons once the 'sieve reset'
icon is displayed on screen.
d. Press the bell button once. The screen will
display the 'sieve reset success' informational icon.
e. Press and hold the power button to turn on the device.
16. Resetting the columns through Inogen Connect App
a. Open the Inogen Connect App on your mobile device or tablet.
b. Navigate to the Advanced screen.
c. Click on Additional Information.
d. Click the Column Reset button.

10.6 BATTERY CARE AND MAINTENANCE

Lithium-ion batteries require special care to ensure proper performance and long life. Use only com-
patible batteries with your device.
• Keep Dry: Always keep liquids away from batteries. If batteries become wet, discontinue use
immediately and dispose of battery properly.
• Effect of temperature on battery performance: The battery powers the device under most
environmental conditions. To extend the run-time of your battery, avoid running in temperatures
less than 5˚C (41˚F) or higher than 35˚C (95˚F ) for extended periods of time.
©2024 Inogen, Inc. All rights reserved.
7
Page 29 of 272
10
13
15c
12
14
15d
16
96-13613-00-01 A