Cleaning, Disinfection, Care And Maintenance - Inogen Rove 6 Benutzerhandbuch

• Disconnecting items from the Bluetooth connection.
• Update of equipment connected to the Bluetooth connection.
• Upgrade of equipment connected to the Bluetooth connection.
9.1 PAIRING YOUR DEVICE WITH THE MOBILE APPLICATION
Instructions for use to pair your device with the mobile application are provided separately. Please
make sure that they are provided by your equipment provider if they are not included in the packaging.
9.2 CYBERSECURITY
Medical device security is a shared responsibility between patients, providers, and manufacturers
of medical devices. Failure to maintain cybersecurity may result in compromised device functionality,
loss of data availability or integrity, or exposure of other connected devices or networks to
security threats.
If using the Inogen Connect App, it is important to ensure the following:
• Make sure to keep your Operating System updated
• Make sure to keep your app updated
• Make sure to enable passwords
• Turn off the concentrator's Bluetooth when not paired with the Inogen Connect App

10. CLEANING, DISINFECTION, CARE AND MAINTENANCE

Operator should perform periodic visual inspection of the device.
WARNING
• DO NOT perform service or maintenance while the equipment is in use.
• DO NOT disassemble the device or any of the accessories or attempt any maintenance other
than tasks described in these instructions for use; disassembly creates a hazard of electrical
shock and will void your warranty. Do not remove the tamper evident label. For events other
than those described in this manual, contact your equipment provider for servicing by
authorized personnel.
• DO NOT use any columns other than those specified in this user manual. The use of
non-specified columns may create a safety hazard and/or impair equipment performance and
will void your warranty.
• Use only spare parts recommended by the manufacturer to ensure proper function and to avoid
the risk of fire and burns.
Periodic visual inspection of the device is required to ensure no damage to the exposed components is
apparent. A typical visual inspection includes:
• Battery connectors - these should not be bent or deformed.
• Cannula barb - this should be straight and fully seated against the housing.
• Housing - the housing should be fully seated and secure with no cracking or other visible damage.
• Particle filters - these should be in place and clear of debris, dust or other obstructions.
Replacement parts can be purchased from your equipment provider or the manufacturer Inogen,
at Inogen.com or by calling +1 877 466 4364, or +31 30 7820689.
©2024 Inogen, Inc. All rights reserved. Page 26 of 272 96-13613-00-01 A