Pulox IN-100 Bedienungsanleitung Seite 34

After switching on,
the power indicator
will light up for
about 1 second and
then go out
immediately.
After switching on,
the power indicator
lights up 1x, then
the device
immediately goes
off or cannot
operate normally.
The nebulizer does
not switch off
automatically when
the medication has
been used up.
The operating time
is too short after
the device has been
charged.
If the device is still not functioning normally after performing all of the above
measures, please contact customer service.
7. Explanation of symbols
Symbol Description
Degree of water and dust
IP22
resistance: IP22
Type BF applied part
The medication container
is not inserted correctly.
No medication in the
medication container
The battery is dead.
Medications can cause
bubbles in the medication
container.
Medications can be found
on the atomizer sheet.
The electrodes on the
container could be dirty.
The battery is not fully
charged.
The battery is damaged.
Insert the medication
container correctly.
Put medication in the
container after consulting
your doctor
Charge the device.
Press the "ON/OFF" button
to turn off the device and
remove the bubbles.
Press the "ON/OFF" button
to turn off the device and
clean the medication
container.
Press the "ON/OFF" button
to turn off the device and
clean the electrodes.
Please charge the device.
Please contact your local
customer service center.
Symbol Description
Class II device
Keep dry
EN