Pulox IN-100 Bedienungsanleitung Seite 27

EN
(1) Attach the medication container to the main unit by sliding it from
the front towards the main unit.
Attention: If you attach the medication container to the main device,
make sure that you attach it correctly. The medication container is
correctly seated when you hear a locking sound. Otherwise, the
electrode line may fail. The device will then not be able to atomize
normally.
1. Press
(2) Remove the medication container from the main unit. Press and
hold the "PUSH" button on the main unit and push the medication cup
away from the main unit.
Attention: To prevent damage to the appliance, always press the
"PUSH" button before removing the medication container.
1. Push away 2. "PUSH"- Button