Pulox IN-100 Bedienungsanleitung Seite 22

of liquid, please press the "ON/OFF" button immediately to avoid
damaging the device. See chapter 6 Troubleshooting.
- Clean the medication cup after each use. Otherwise, the device
will not work correctly.
- The recommended maximum liquid capacity is 10ml, and the
minimum capacity is 2ml.
- When the device is used at its maximum capacity and the
temperature of the medication in the cup is higher than the
ambient temperature during normal use, the maximum
temperature should be below 40°C.
- When cleaning the medication container, do not place the device
directly under a water jet, as water may enter the device.
- Do not use the device near high-frequency electromagnetic
transmitters or other high-frequency electronic devices.
- Hold the device as vertically as possible during use.
- Do not drop the main unit or medication container and do not
subject them to strong impacts.
- Do not touch the metal mesh of the nebulizer plate with a cotton
swab or sharp objects. Otherwise, it may cause functional damage
to the device.
- Patients who have sensitive areas with bruises, burns,
inflammation, and facial/oral injuries should avoid use. If any
discomfort occurs during use, please stop using it immediately and
consult a doctor.
- Commonly used medications include mucolytics, bronchodilators,
and antibiotics, such as terbutaline sulfate solution for
nebulization and ipratropium bromide solution for inhalation. The
active ingredient is water-soluble, non-irritating, non-toxic and
does not trigger any allergic reactions. The pH value is almost
neutral, it can adapt to the colloid osmotic pressure of the tissue
and has a good nebulization effect and stability.
- The face mask is made of softener-free PVC material. Clinical
medical personnel should follow the instructions of the
EN