Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
The device is overloaded because the
contents are too thick or something has
become caught in the insert.
►
Disconnect the device from the
mains power, open the mixing bowl
and remove some of the contents or
add liquid or carefully remove the
blockage.
Unpleasant smell during use
The device is being used for the first
time.
►
A smell often develops when new de-
vices are first used. The smell should
disappear once the device has been
used several times.
If the motor is placed under too much
strain, as well as the device being
switched off by the electronic protective
TECHNICAL DATA
Article number:
Model number:
Voltage supply:
Power:
Protection class:
Capacity:
Timer:
Rotational speed of the blade:
Temperature setting:
ID of the operating instructions: Z 09946 M DS V2 0820 md
All rights reserved.
40
09946_Inlay_de-en-fr-nl_A5_V2.indb 40
09946_Inlay_de-en-fr-nl_A5_V2.indb 40
switch, a smell may be produced due
to the heated motor. However, this is
completely harmless. After the cool-down
time, the device is in full working order
again.
DISPOSAL
Dispose of the packaging material
in an environmentally friendly man-
ner so that it can be recycled.
This device is governed by the
European Directive 2012/19/EU
on waste electrical and electronic
device (WEEE). Do not dispose
of this device as normal domestic
waste, but rather in an environ-
mentally friendly manner via an
officially approved waste disposal
company.
09946
CF1602FP
220 – 240 V ~ 50 / 60 Hz
1500 W; (heating element: 1000 W; motor: 500 W)
I
2.3 l (useful volume); 3.5 l (nominal volume)
up to 90 minutes
10 levels (approx. 125 – 3400/min)
37°C to 120°C
25.08.2020 17:08:54
25.08.2020 17:08:54
Werbung
