Scheppach ke 70m Originalbetriebsanleitung Seite 24

12. Before commissioning
• Observe the safety instructions before the commissioning.
• All safety devices and aids must be installed.
• Only carry out modifications, setting, measuring and cleaning work when the engine is switched off. Pull out the mains
plug and wait for the rotating tool to stop.
• Check the V-belt tension after the first hour of operation and every time before starting up.
24 | GB
• Attach all springs to the protective basket prior to commission-
ing.
• Hang the tension spring (F) under the table
www.scheppach.com