Parkside Performance PBSPA 12 A1 Originalbetriebsanleitung Seite 22

GB IE
remain. Due to its construction and build,
this electric tool may present the following
hazards:
a) Cuts
b) Ear damage if working without ear pro-
tection.
c) Damage to your health caused by
swinging your hands and arms when
operating the appliance for longer pe-
riods of time or if the unit is not held or
maintained properly.
Warning! During operation, this
electric tool generates an electro-
magnetic field which, under certain
circumstances, may impair the func-
tionality of active or passive medical
implants. To reduce the risk of seri-
ous or lethal injuries, we recommend
that persons with medical implants
consult their doctor and the manu-
facturer of their medical implant
before operating the machine.
Observe the safety infor-
mation and notes on char-
ging and proper use as
shown in the instruction
manual for your battery
and charger from the Park-
side X 12 V Team series. A
detailed description of the
charging process and further
information can be found in
the separate operating inst-
ructions.
Operation
Remove the rechargeable
battery from the device to
prevent accidental operation.
Risk of injury!
22
Ensure that the ambient tem-
perature does not exceed
50°C or fall below -20°C du-
ring work.
Removing/inserting
the Battery
1. To remove the battery (5) from the ap-
pliance, press the release button (6) on
the battery and pull out the battery.
2. To insert the battery (5), place it on the
guide track and push it into the appli-
ance. It will audibly snap in.
Checking the battery
charge level
The battery's (5) charge level is indicated
by the charge state indicator (8).
The LEDs indicate the battery's charge
level, when the device is in operation.
Press and hold the power button (7).
red-yellow-green => Battery fully charged
red and yellow => Battery half charged
red => Battery needs to be charged
Recharging the battery
Allow a hot battery to cool before
charging.
Charge the battery (5) when only
the red LED on the level indicator is
illuminated.
PAPK 12 A1
Charging
time (h.) PAPK 12 A2
PLGK 12 A1
PLGK 12 A2
PLGK 12 B2
PAPK 12 B1
PAPK 12 B2
1 2
1 2
0,5 1