Parkside Performance PBSPA 12 A1 Originalbetriebsanleitung Seite 120

GB IE
• In the power tools, use
only the batteries designed
for the purpose. The use of
other batteries may result in inju-
ries and risk of fire.
• Keep the unused battery
away from paper clips,
coins, keys, nails, screws
and other small metal ob-
jects, which could cause
bridging of the contacts. A
short circuit between the battery
contacts may cause burns or fire.
• If used incorrectly, liquid
may leak from the battery.
Avoid contact with this.
In the event of accidental
contact, rinse off with wa-
ter. If the liquid gets into eyes,
seek medical assistance. Leaking
battery fluid may cause skin irrita-
tions or burns.
• Do not use damaged or al-
tered batteries. Damaged or
altered batteries can be unpre-
dictable and lead to fire, explo-
sion or risk of injury.
• Do not expose batteries to
fire or elevated tempera-
tures. Fire or temperatures over
130 °C can cause an explosion.
• Follow all instructions for
charging and never charge
the battery or the battery-
powered tool outside the
temperature range stated in
the operating instructions.
18
Incorrect charging or charging
outside the permitted temperature
range may destroy the battery
and increase the risk of fire.
Service
• never repair damaged
batteries. All battery repairs
should be carried out by the
manufacturer or authorised cus-
tomer service centres only.
Special safety directions for
battery-operated tools
• Ensure that the device is
switched off before inserting
the battery. Inserting a battery
into a power tool that is switched
on may result in accidents.
• Recharge the batteries in-
doors only because the
battery charger is designed
for indoor use only.
• To reduce the electric shock
hazard, unplug the battery
charger from the mains be-
fore cleaning the charger.
• Do not subject the battery
to strong sunlight over
long periods and do not
leave it on a heater. Heat
damages the battery and there
is a risk of explosion.
• Allow a hot battery to cool
before charging.