Brake Release - Otto Bock skippi Bedienungsanleitung

If you make a mistake carrying out these steps, the control must
be turned off and on again for another try. After successful
deactivation of the drive-away lock, the next turning off and
on will directly lead to the driving menu. For application of
the drive-away lock it must be activated again.

11.2 Brake Release

In case of failure of the control unit or insufficient battery
capacity, it is possible to push the Skippi. For this, the brake
on the right and left drive motor is disengaged by means of
the mechanical release mechanism (Fig. 27).
Fig. 27
The control will recognize that the brake has been released
and automatically deactivate the driving function. On the
display the drive wheel symbol (flashes) as well as the brake
symbol and the open-end wrench symbol indicate that the
brake has been released.
82