Werbung
• This sewing machine
used by operators who have received
the necessary training in safe use before-
hand.
• The sewing machine should not be used
for any applications other than sewing.
• Attach all safety devices before using the
sewing machine. If the machine is used
without
these devices
may result.
• Do not touch any of the moving parts or
press any objects against the machine
while sewing, as this may result in per-
sonal injury or damage to the machine.
• Turn off the power switch before carry-
ing out cleaning. The motor will keep
turning even after the power is switched
off as a result of the motor's
until the motor
stops fully before start-
ing work.
The machine
may operate
is pressed by mistake, which could result
in injury.
Maintenance
• Maintenance
and inspection
ing machine should only be carried out
by a qualified technician.
• Ask your Brother dealer or a qualified
electrician
to carry out any maintenance
and inspection
of the electrical
• Turn off the power switch and discon-
nect the power
cord from the wall out-
let at the following times, otherwise the
machine
may operate
pressed by mistake, which could result
in injury.
However,
the motor
will
even after the power
is switched
a result
of the motor's
the motor
stops fully
work.
• When carrying
out inspection,
ment
and
maintenance
• When
replacing
consumable
such as the rotary hook
A CAUTION
Sewing
should only be
attached,
injury
Cleaning
inertia.
Wait
if the treadle
and inspection
of the sew-
system.
if the treadle
is
keep turning
off as
inertia.
Wait until
before
starting
adjust-
parts
— ii —
Turn off the power switch at the follow-
ing times, the machine may operate if
the treadle is pressed by mistake, which
could result in injury.
• When threading
the needle
• When replacing the needle and bob-
bin
• When not using the machine
when leaving the machine unattended
• If using a work table which
the casters
should
be secured
way so that they cannot
e If an error occurs
in machine,
mal noises
or smells
are noticed,
diately turn off the power switch. Then
contact your nearest Brother dealer or a
qualified
technician.
• If the machine develops a problem,
tact your nearest Brother dealer or a
qualified
technician.
• Be sure to wear protective
gloves when handling the lubricating oil,
so that no oil gets into your eyes or onto
your skin, otherwise inflammation
result.
Furthermore,
do not drink
any circumstances,
as it can cause vom-
iting and diarrhoea.
Keep the oil out of the reach of children.
• If the power switch needs to be left on
when carrying
out some adjustment,
extremely
careful to observe all safety
precautions.
• Use only the proper
replacement
as specified
by Brother.
e If any safety
devices
moved, be absolutely sure to re-install
them to their original
check that they operate correctly before
using the machine.
• Any problems
in machine
which
result
from
unauthorized
cations
to the
machine
ered by the warranty.
and
has casters,
in such a
move.
or if abnor-
imme-
con-
goggles
and
can
the oil under
be
parts
have
been
re-
positions
and
operation
modifi-
will
not
be cov-
DB2-B736 (English)
Werbung
