Springlane Elisa Bedienungsanleitung Seite 27

5. Add chilled ingredients into the
removable ice cream container. Be
careful not to exceed the maximum
capacity. The ice cream container
should be at least 1/3 full, maximum
2/3 full, as the ice cream mixture
expands during the freezing process.
6. Place the lid on the ice cream
container and turn it counter-
clockwise until it locks into place.
7. Select ice cream programme.
8. You can use the corresponding button
to set the speed of the stirring arm;
3 levels are available. Select the
desired level by pressing the button
several times.
9. The machine is pre-programmed to
45 minutes. We recommend this
setting for ice cream mixtures that
have been properly chilled ahead of
time. Adjust the time as you wish
using the arrow keys. Hold down the
arrow keys to change the time in
10-minute increments. You can adjust
the duration of the programme at any
time using the arrow keys.
10. Now press the "Start/Stop" button
to start the programme. The status
"Cooling" will appear in the display. You
can cancel the programme at any time
by pressing the ice cream cone icon.
11. During the programme, the remaining
time and current cooling
12. temperature are alternately shown
on the display. When making ice
cream, the temperature is usually
between -12 and -20 °C, depending
on environmental factors.
13. The ice cream is ready when it has
a creamy consistency resembling a
very thick milkshake. If the machine
has stopped on its own, the motor
protection feature has kicked in and
the ice cream has already set. When
the set time has expired, the machine
will make the acoustic signal you
previously selected. If the machine is
on mute, there will be no beep. The
display flashes and shows "Ready!".
14. Now remove the ice cream. If the
container is not removed within
10 minutes, the post-cooling function
will begin automatically. To be able to
form scoops, we recommend freezing
the ice cream for approx. 60 minutes
in a suitable container in the freezer.
Pre-cool function
The ice cream programme allows you to
select the pre-cool function. Pre-cooling
mode brings the machine and the coolant
- and thus the ice cream container used -
to the right temperature for making ice
cream. You can use this mode to make
the ice cream mixture ready for freezing a
little faster. The pre-cool function lasts
5 minutes.
27