Scheppach HC24V Original Bedienungsanleitung Seite 23

• If hazardous liquids are processed, wear protective
filter units (face guards). Also, adhere to the safety
information provided by the manufacturers of such
liquids.
• The details and designations of the Ordinance on
Hazardous Substances, which are displayed on the
outer packaging of the processed material, must be
observed. Additional protective measures are to be
undertaken if necessary, particularly the wearing of
suitable clothing and masks.
• Do not smoke during the spraying process and/or in
the work area. Risk of explosion! Paint vapours are
easily combustible.
• Never set up or operate the equipment in the vicinity
of a fire place, open lights or sparking machines.
• Do not store or eat food and drink in the work area.
Paint vapours are harmful to your health.
• The work area must exceed 30 m³ and sufficient
ventilation must be ensured during spraying and
drying.
• Do not spray against the wind. Always adhere to the
regulations of the local police authority when spray-
ing combustible or hazardous materials.
• Do not process media such as white spirit, butyl al-
cohol and methylene chloride with the PVC pressure
hose. These media will destroy the pressure hose.
• The work area must be separated from the compres-
sor so that it cannot come into direct contact with the
working medium.
Operating pressure vessels
• You must keep your pressure vessel in good work-
ing order, operate the vessel correctly, monitor the
vessel, carry out necessary maintenance and repair
work immediately and meet the relevant safety pre-
cautions.
• The supervisory authority may enforce essential
control measures in individual cases.
• A pressure vessel is not allowed to be used if it has
faults or deficiencies that can endanger workers or
third parties.
• Check the pressure vessel for signs of rust and dam-
age each time before using. Do not use the com-
pressor with a damaged or rusty pressure vessel. If
you discover any damage, then please contact the
customer service workshop.
Do not lose these safety instructions.
Residual risks
The product has been built according to state-oft-
he-art and the recognised technical safety rules.
However, individual residual risks can arise during
operation.
• Comply with the stipulated maintenance and safety
instructions in the operating manual.
• Remain attentive at all times when working, and
keep third parties at a safe distance from your work
area.
• Residual risks can be minimised if the "Safety In-
structions" and the "Intended Use" together with the
operating manual as a whole are observed.
• Furthermore, despite all precautions having been
met, some non-obvious residual risks may still re-
main.
Even when the product is being used properly, there
will always be certain residual risks which cannot be
completely ruled out. The following potential hazards
can arise due to the type and design of the product:
• Unintentional starting up of the product.
• Damage to hearing if the stipulated hearing protec-
tion is not worn.
• Dirt particles, dust etc. can get irritate the eyes or
face despite wearing safety goggles.
• Inhaling swirled up particles.
m Warning
This power tool generates an electromagnetic field
during operation. This field can impair active or
passive medical implants under certain circum-
stances. In order to prevent the risk of serious or
deadly injuries, we recommend that persons with
medical implants consult with their physician and
the manufacturer of the medical implant prior to
operating the power tool.
6. Technical Data
Mains connection
Motor rating
Operating mode
Compressor speed
Pressure vessel capacity
Operating pressure
Theoretical intake capacity
Theoretical delivery rate
www.scheppach.com
230 V~ 50 Hz
1500 W
S3 25%
3750 min
-1
24 l
approx. 10 bar
approx. 180 l/min
approx. 120 l/min
GB | 23