Assembly - Cleanmaxx Z 09671 Gebrauchsanleitung

EN

Assembly

CAUTION!
■ Keep children away from the packaging material. There is a danger of suffocation!
Take all parts out of the packaging and place them carefully on a level surface. If necessary,
place protective fi lm underneath the parts to prevent any damage to delicate surfaces.
Carefully remove all packaging materials. Check the items supplied for completeness
(see the"Items Supplied and Device Overview" chapter) and possible transport damage.
If you fi nd any damage to the components, do not use them (!), but contact our customer
service department.
Inserting / Removing the Suction Hose
Inserting the Telescopic Tube
Adjusting the Length of the Telescopic Tube
A
1. Insert the thicker end of the suction hose as illustrated into the
connection on the front of the device. The suction hose must be
heard to engage in place.
2. To remove the suction hose, press the two opposite buttons
on the connection piece and as you do this pull out the suction
hose.
1. Insert the curved end of the suction hose into the larger opening
of the telescopic tube. To ease insertion, twist the tube slightly
back and forth.
2. Insert the other end of the telescopic tube into the desired
nozzle.
1. Press the slide (A) on the telescopic tube downwards and
adjust the tube to the desired length.
2. Release the slide and move the tube slightly up or down until
it engages.
20