Accessories; Assembly; Removing / Inserting The Dust Container - Cleanmaxx PC-P011E Bedienungsanleitung

EN

Accessories

• The electric fl oor nozzle (I) is suitable for both carpets and hard fl oors. It has a ro-
tating cleaning brush to make it easier to pick up hair and fl uff.
• The brush nozzle (A) is used for vacuuming upholstery and textiles and for removing
dust from delicate objects such as picture frames, lamp shades, keyboards, books
etc.The brush head can be pivoted 360°.
• The crevice nozzle (H) is suitable for places which are hard to get to, such as cor-
ners, crevices or recesses, e.g. for upholstery and cleaning the inside of cars.
• The extension tube (G) makes it easier to reach the tops of cupboards, ceilings and
corners and, along with the electric fl oor nozzle, allows fl oors to be cleaned.
• The holder for the brush and crevice nozzle (B) is suitable for securing the two
nozzles to the extension tube easily to save space.
• The wall bracket (C) is suitable for storing the device in a space-saving manner. The
mains cable of the mains adapter (E) can be tucked in on the small hook on the wall
bracket.

Assembly

Attaching / Detaching the Electric Floor Nozzle and Extension Tube
• The electric fl oor nozzle (I) and the extension tube (G) are plugged directly onto the
suction opening (11). They must engage audibly. Attach the electric fl oor nozzle to the
extension tube in the same way.
• To detach it, press the release button (12) above the suction opening and pull the
electric fl oor nozzle or the extension tube out at the same time.
Attaching / Detaching the Brush and Crevice Nozzle
• Plug the nozzle you want into the suction opening (11) or the extension tube (G). The
nozzle must engage audibly.
• To detach it, press the release button (12) above the suction opening and pull the
nozzle out at the same time.

Removing / Inserting the Dust Container

• Removing: Press the release button (13) on the front of the dust container and pull
the dust container upwards to remove it.
• Inserting: Insert the dust container into the motor unit (F) from above. When you do
this, make sure that the release button is pointing downwards (towards the motor
unit) (Picture A). The dust container must engage audibly.
09196_09197_Inlay_DE-EN-FR-NL_A5_V2.indb 20 09196_09197_Inlay_DE-EN-FR-NL_A5_V2.indb 20
20
22.05.2019 12:09:58 22.05.2019 12:09:58