Suction Nozzles; Assembly; Inserting/Removing The Suction Hose - Cleanmaxx HJX1406-D Gebrauchsanleitung

Suction nozzles

ATTENTION!
■ Always turn off the vacuum cleaner fi rst before changing the nozzles.
Floor nozzle
Combi nozzle (Tile/brush nozzle)

Assembly

ATTENTION!
■ Risk of suffocation! Keep the packaging material away from children and animals.
■ Make sure that the device is not connected to the mains electricity supply before you
attach or remove the accessories.
• Unpack all parts and make sure that the product contents are complete (see chapter
"Product contents") and check for any damage from transport. If you identify dam-
age to the components, do not use them (!), instead contact our customer service
centre.
• Before using the device, remove all packaging materials and any labels that may be
on the device and are used for protection during transportation or for advertising.

Inserting/removing the suction hose

The fl oor nozzle is suitable both for carpets and smooth fl oors.
With the foot switch, you can switch between smooth fl oor and
carpet. A brush is deployed on the bottom for smooth fl oors.
Turn the end piece in the direction of the arrow to convert the tile
nozzle into a brush nozzle:
• The tile nozzle is suitable for cushions, cleaning the inside of
passenger vehicles as well as all nooks and crannies that can't
be reached with other nozzles.
• The brush nozzle is suitable for all uneven objects, furniture,
lamps, profi ling strips and skirting boards, window sills etc.
• Insert the connection piece of the suction hose in the suc-
tion opening on the dust container and turn it as far as it
will go in an anticlockwise direction.
• To remove the suction hose turn the connection piece
clockwise and pull it out.
21 EN