Before Initial Use; Assembly - Cleanmaxx VL-621E-A Gebrauchsanleitung

Before Initial Use

PLEASE NOTE!
■ Never remove the rating plate and any possible warnings!
• Before using the device, remove all packaging materials and any labels that may be
on the device and are used for protection during transportation or for advertising.
Please note that there may be dirt residues in the dust container or in the fi lters.
These residues can be attributed to quality checks and do not constitute a defect
with the device.

Assembly

PLEASE NOTE!
■ Switch off the device before a nozzle is replaced.
Inserting / Removing the Hose
Inserting / Removing the Telescopic Tube
Adjusting the Length of the Telescopic Tube
A
The combi nozzle is a combination of an upholstery nozzle and
brush nozzle. The brush attachment can be pushed onto the uphol-
stery nozzle or pulled off:
• The upholstery nozzle is suitable for cleaning all kinds of uphol-
stery, e.g. sofas, car seats etc.
• The brush nozzle is suitable for all uneven objects, furniture,
lamps, profi les and skirting boards, window ledges, etc.
• Plug the connection piece of the suction hose into the suc-
tion opening on the dust container. It must engage audibly.
• To take off the suction hose, press the locking lug on the
connection piece and pull out the suction hose.
• Plug the handle into the appropriate opening of the tele-
scopic tube. Twist the handle back and forth slightly as you
do this. Then check the connection to make sure there is a
secure fi t.
• To detach the telescopic tube, pull it away from the handle.
• Push the slider (A) on the telescopic tube downwards and
pull the telescopic tube out to the length you want.
• Release the slider and move the telescopic tube a little bit
more until it engages.
19 EN