Assembly; Inserting/Removing The Hose; Connecting The Telescopic Tube; Adjusting The Length Of The Telescopic Tube - Cleanmaxx VC4807T-240 Gebrauchsanleitung

Assembly

CAUTION!
❐ Keep children away from the packaging material. There is a danger of suffocation!
Take all parts out of the packaging and place them carefully on a level surface. If necessary, place
protective fi lm underneath the parts to prevent any damage to delicate surfaces. Carefully re-
move all packaging materials. Check the items supplied for completeness (see the"Items supplied
and device overview" chapter) and possible transport damage. If you fi nd any damage to the
components, do not use them (!), but contact our customer service department.

Inserting/removing the hose

1. Insert the thicker end of the suction hose as illustrated into the con-
2. To remove the suction hose, press the two opposite buttons on the

Connecting the telescopic tube

1. Insert the curved end of the suction hose into the larger opening of
2. Insert the other end of the telescopic tube into the desired nozzle.

Adjusting the length of the telescopic tube

1. Press the slide on the telescopic tube downwards and adjust the tube
2. Release the slide and move the tube slightly up or down until it en-
08200_DE-GB-FR-NL_V1.indb 24 08200_DE-GB-FR-NL_V1.indb 24
nection on the front of the device. The suction hose must be heard
to engage in place.
connection piece and as you do this pull out the suction hose.
the telescopic tube. To ease insertion, twist the tube slightly back
and forth.
to the desired length.
gages.
24
31.10.12 09:24 31.10.12 09:24