Assembly; Inserting/Removing The Hose; Inserting/Removing The Telescoping Tube - Cleanmaxx 07023 Gebrauchsanleitung

Turbo Nozzle
Hard Floor Nozzle

Assembly

ATTENTION!
■ Make sure that the device is not connected to the power supply before you attach or
remove any accessories.

Inserting/removing the hose

Inserting/removing the telescoping tube

07023_DE-EN-FR-NL_A5_V1.indb 21 07023_DE-EN-FR-NL_A5_V1.indb 21
21
The turbo nozzle allows you to easily remove animal hairs
and similar soiling as well as to clean mattresses, beds,
blankets and carpets.
The hard fl oor nozzle is suitable for smooth surfaces such
as parquet fl oors and tiles.
• Insert the suction hose connector into the suction opening
on the device. It must audibly lock into place.
• To remove the suction hose push the knobs on the con-
nector and pull the suction hose out.
• Insert the open end of the handle into the corresponding
opening on the telescoping tube. In the process, turn the
handle back and forth somewhat. Check to make sure
that the connection is secure.
• To remove the telescoping tube pull it off of the handle.
EN
04.08.2017 10:36:00 04.08.2017 10:36:00