Charging Up The Battery; Assembly - Cleanmaxx PC-P003W Gebrauchsanleitung

EN

Charging Up the Battery

CAUTION!
■ Risk of short-circuits! Do not insert any conducting objects (e.g. screwdrivers or
similar items) into the charging socket of the main unit.
■ The battery may only be charged using the charger which is supplied with the device.
Do not use the charger to charge up other batteries.
■ Remove the mains plug of the charger from the plug socket if you are not using it for
a prolonged period.
■ It is essential that you charge up the battery fully before you fi rst use the
device in order to achieve the maximum charging capacity. The fi rst charge
will last for 12-15 hours.
3. Disconnect the charger from the mains power and then from the device. Store it out
of the reach of children.

Assembly

Hand-Held Vacuum / Floor Vacuum Cleaner Conversion
22
1. First connect the charger to the socket of the main unit
and then to a properly installed, easily accessible plug
socket. The control lamp on the handle of the main unit
will then light up.
2. Allow the battery of the device to charge up for approx.
12 - 15 hours on the fi rst charge and then for approx.
7 - 11 hours. The control lamp lights up when the device
is connected to the mains power.
You can convert the hand-held vacuum cleaner into a fl oor
vacuum cleaner by attaching the handle rod to the main unit.
1. Before initial use, plug the two parts of the handle rod
together as far as the limit stop. (The handle rod will then
not be taken apart again.)
2. Insert the connection piece of the handle rod into the
opening on the main unit.
3. Attach the fl oor nozzle (see below).
4. To remove the handle rod, press the locking lug of the
connection piece and pull the handle rod up and out of the
device as you do so.