1.4
Storage
In certain cases, storage instructions may be specified on the packages that go
beyond the requirements specified here.
These must be observed accordingly.
n
Do not store outdoors.
Store in a dry and dust-free place.
n
n
Do not expose to aggressive media.
Keep away from direct sunlight.
n
n
Avoid mechanical vibrations.
n
If stored for longer than three months, regularly check the condition of all parts and
packaging. If necessary, refresh or renew the packaging.
n
Storage must be frost-proof.
n
Further information can be found in the chapter
NOTICE!
Intermediate storage
– The packaging is designed for a storage period of three months.
– If the machine is not operational for a period of longer than one week: fully
empty and rinse tank with water.
CAUTION!
Risk of damage to the machine.
Ingress of dirt and water can damage the machine . Never clean the electrical
equipment or the parts of the equipment with a steam cleaner or by spraying
them with water.
1.5
Equipment marking – identification plate
Information on equipment marking and information on the rating plate can be
found in
It is important to provide the correct specification of the name and type in all
queries. This is the only way of ensuring fast and accurate processing of your
enquiry.
Ä Chapter 10 'Technical data' on page 76 .
9
Ä 10 Technical data
MAN050481 Ver. 04-06.2024
General