ECOLAB EcoPlus PDRX Betriebsanleitung Seite 103

Chemical hazards (metering medium/active substance)
WARNING!
Burns caused by harmful chemicals
Leaks on the component can allow corrosive chemicals to escape and cause
serious injury.
– Read the enclosed safety data sheet carefully before using chemicals.
– The safety regulations and the required protective clothing for working with
chemicals must be complied with.
– Safety devices such as showers and eye flushing must be accessible and
checked regularly to ensure that they are fully functional.
– Ensure adequate ventilation and extraction.
– Avoid skin and eye contact.
– Check the component regularly for tightness.
– Do not put the component into operation if leaks occur.
– If leaks are identified, trigger the emergency stop function immediately.
– Do not operate the component again until the leaks have been repaired.
DANGER!
Spilled chemicals can pose a biological hazard.
Be careful not to spill chemicals or allow them to leak; otherwise, a biological
hazard cannot be ruled out. Make sure that suitable binding agents are
provided at the filling point according to the safety data sheet for the metering
chemicals.
DANGER!
Risk of injury to the skin and eyes caused by the chemical used
(metering medium).
– Read the enclosed safety data sheet carefully before using the metering
medium.
– The safety regulations and the required protective clothing when working
with chemicals must be complied with.
– Attention must be paid to the information included on the product data
sheet for the metering medium used.
DANGER!
Hands must be washed before breaks and at the end of the working day.
Information about the usual precautions when handling chemicals and about
the use of PPE can be found on the relevant safety data sheet for the chemical
being used and must be complied with.
19
Safety
MAN050481 Ver. 04-06.2024