Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Decommissioning, removal and disposal
11
Decommissioning, removal and disposal
NOTICE!
The following disassembly description is the recommended method.
However, different local conditions and physical factors will determine the most
appropriate method for disassembly in practice.
CAUTION!
When working on parts that come into contact with dangerous products,
the prescribed protective clothing (safety goggles, protective gloves, apron if
necessary) must be used because of the risk of burns.
When working on the electrical connection of the EcoPlus PDRX, all applicable
international, national and local safety regulations must be observed.
For work on the power connection, isolate it first (i.e. shut down power).
Recommended procedure
1.
Electrically isolate the unit (i.e. shut it down).
2.
Remove the detergent capsule.
3.
Remove chemical residue from the funnel, e.g. by cleaning in a commercial
dishwasher.
4.
Install empty chemical capsules, reconnect the unit to the power source and operate
for a few minutes with clean water.
5.
Close the water inlet (using angle valve or similar) and remove the connection.
6.
Disconnect the device from its power source.
7.
Drain the unit completely and clear all the chemical residue from inside the unit.
8.
Either dispose of the unit in accordance with applicable national directives or
package safely (cardboard box with padding material) and return to the Ecolab-
authorised company for recycling.
MAN050481 Ver. 04-06.2024
78
Werbung
