Set The Process Data Width Of The Bus Module; Setting The Process Data Width Of The Bus Module - Fronius Ri Fb Pro/I Bedienungsanleitung

Set the Process Data Width of the Bus Module

Setting the pro- Note down the IP address of the welding machine used:
cess data width
1
of the bus modu-
2
le
3
4
Open website of the welding machine in the internet browser:
5
6
7
Set the process data width of the bus module:
8
9
10
On the welding machine control panel, select "Defaults"
On the welding machine control panel, select "System"
On the welding machine control panel, select "Information"
Note down the displayed IP address (example: 10.5.72.13)
Connect the computer to the network of the welding machine
Enter the IP address of the welding machine in the search bar of the internet
browser and confirm
Enter the standard user name (admin) and password (admin)
- The website of the welding machine is displayed
On the welding machine website, select the "RI FB PRO/i" tab
Under "Process data", select the desired process data configuration
Select "Save"
- The field bus connection is restarted and the configuration is applied
Englisch (US)
29