Function Overview; Device Concept; Functions Of The Buttons On The Rc Bar Ijob /Tmc - Fronius Rc Bar Ijob Bedienungsanleitung

Function Overview

Device concept

Functions of the Functions of the arrow buttons on the RC Bar iJob /TMC:
buttons on the
RC Bar
iJob /TMC
14
The RC Bar iJob /TMC remote control
has the following functions:
- Reading, adjusting, and selecting
parameters.
The RC Bar Up/Down /TMC remote
control has the following functions:
- Changing the welding power in
synergic operation.
- The desired parameter is chosen
using the arrow buttons.
- Use the +/- buttons to change the
selected parameter.
- The display shows the selected pa-
rameter and the current value of
the parameter.