Scheppach ETHT500 Originalbetriebsanleitung Seite 20

1. Introduction
Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer,
We hope your new product brings you much enjoyment
and success.
Note:
In accordance with the applicable product liability laws,
the manufacturer of this product assumes no liability
for damage to the product or caused by the product
arising from:
• Improper handling
• Non-compliance with the operating manual
• Repairs carried out by third parties, unauthorised
specialists
• Installing and replacing non-original spare parts
• Improper use
• Failures of the electrical system in the event of the
electrical regulations and VDE provisions 0100, DIN
57113 / VDE 0113 not being observed
Note:
Read the whole text of the operating manual before as-
sembly and commissioning.
This operating manual should help you to familiarise
yourself with your product and to use it for its intended
purpose.
The operating manual includes important instruc-
tions for the safe, proper and economic operation of
the product, for avoiding danger, for minimising repair
costs and downtimes and for increasing the reliability
and extending the service life of the product.
In addition to the safety instructions in this operating
manual, you must also observe the regulations appli-
cable to the operation of the product in your country.
Keep the operating manual package with the power
tool at all times and store it in a plastic cover to pro-
tect it from dirt and moisture. They must be read and
carefully observed by all operating personnel before
starting the work.
The product may only be used by personnel who have
been trained to use it and who have been instructed
with respect to the associated hazards.
The required minimum age must be observed.
20 | GB
In addition to the safety instructions in this operating
manual and the separate regulations of your country,
the generally recognised technical rules relating to the
operation of such products must also be observed.
We accept no liability for accidents or damage that
occur due to a failure to observe this manual and the
safety instructions.
2. Product description (Fig. 1)
1. Cutter bar
2. Hand guard
3. Motor head / ventilation slots
4. Release button
5. Connection piece
6. Telescopic handle
7. Star screw
8. Handle
9. Carrying eye
10. On/off switch
11. Handle
12. Safety switch
13. Mains cable
14. Strain relief
15. Impact protection with hole for hanging up the de-
vice
A Allen screw
B Allen key
3. Scope of delivery
Item
3, 6
A
B
4. Proper use
This hedge trimmer is intended for cutting hedges,
bushes and shrubs.
www.scheppach.com
Quantity Designation
1x Electric telescopic hedge
trimmer (motor head unit +
telescopic handle unit)
1x Operating manual
1x Shoulder strap
6x Allen screw
1x Allen key
1x Blade guard