Scheppach ETHT500 Originalbetriebsanleitung Seite 27

3 Fertiliser and other garden chemicals contain sub-
stances that can have a severely corrosive effect
on the metal parts. Do not store the product in the
vicinity of these substances.
Store the product and its accessories in a dark, dry and
frost-free place that is inaccessible to children.
The optimum storage temperature lies between 5 and
30 ˚C.
Store the product in its original packaging. Cover the
product to protect it from dust or moisture. Store the
operating manual with the product.
15. Maintenance
Have maintenance and repair tasks that are not de-
scribed in this operating manual, carried out by a
specialist workshop. Use only original spare parts.
1 Check the product for obvious defects such as
loose, worn or damaged parts before each use.
2 Check that the screws in the cutter bar are tight.
3 Check the covers and protective devices for dam-
age and correct seating. Replace them if neces-
sary.
4 You can smooth out slight nicks on the cutting
teeth yourself. To do this, draw an oil stone along
the cutting edges. Only sharp cutting teeth provide
a good cutting performance.
5 Blunt, bent or damaged cutter bars must be re-
placed.
16. Repair & ordering spare parts
After repairs or maintenance, make sure that all safe-
ty-related parts are installed and are in perfect con-
dition. All parts which may cause injury must be kept
where they are inaccessible to children or others.
Attention: According to the German Product Liability
Act, no liability is accepted for damage caused by im-
proper repairs or by not using original spare parts.
Such work should be performed by a customer service
centre or an authorised specialist. The same applies to
accessory parts.
Spare parts and accessories can be obtained from our
Service Centre. To do this, scan the QR code on the
front page.
Connections and repairs
Connections and repair work on the electrical equip-
ment may only be carried out by electricians.
Please provide the following information in the event
of any queries:
• Type of current for the motor
• Machine data - type plate
• Motor data - type plate
Important note in the case of repairs:
When returning the product for repair, for safety rea-
sons, ensure that the product is free of oil and fuel
when it is sent to the service centre.
16.1 Ordering spare parts
Please provide the following information when order-
ing spare parts:
• Model designation
• Item number
• Type plate data
16.2 Service information
With this product, it is necessary to note that the fol-
lowing parts are subject to natural or usage-related
wear, or that the following parts are required as con-
sumables.
Wearing parts*: Cutting blade
* may not be included in the scope of delivery!
17. Disposal and recycling
Notes for packaging
Notes on the electrical and electronic equipment
act [ElektroG]
Waste electrical and electronic equipment
does not belong in household waste, but
must be collected and disposed of sepa-
rately!
• Used batteries or rechargeable batteries that are not
installed permanently in the old appliance must be
removed non-destructively before disposal! Their
disposal is regulated by the battery act.
• Owners or users of electrical and electronic devices
are legally obliged to return them after use.
www.scheppach.com
The packaging materials are recy-
clable. Please dispose of packag-
ing in an environmentally friendly
manner.
GB | 27