Removing A Wheel And Exchanging A Tyre - Handicare Hippo Bedienungsanleitung

Operating instructions
and exchange the lamp. Next, replace the lamp and fix it with the locking ring.
Warning!
If you experience repeated malfunctions, this may indicate a fault in the
wheelchair: contact your dealer.

Attention!
Always switch off again after remedying the malfunction!
All other malfunctions must be remedied by dealer personnel.
3.6.2

Removing a wheel and exchanging a tyre

Preferably leave the changing of tyres to your dealer.
Both on the back wheels and on the front wheels, the rims are divisible.
If you want to exchange the tyre yourself, proceed as follows:
Front wheel:

Unscrew the four inner M8 bolts and remove the wheel from the hub.

Let the air out of the tyre.

Unscrew the six wheel bolts.
Warning!
Never unscrew these bolts while the tyre is still pumped up!

Remove the old tyre and place the new one.
Make sure the inner tube does not get caught between the rim halves!

Tighten the six wheel bolts.

Mount the wheel on the hub by tightening the four M8 bolts.
Back wheel:

Unscrew the large M8 wheel bolt and remove the back wheel.

Let the air out of the tyre.

Unscrew the five wheel bolts.
Warning!
Never unscrew these bolts while the tyre is still pumped up!

Remove the old tyre and place the new one.
Make sure the inner tube does not get caught between the rim halves!

Mount the wheel back in the fork.
34