Physical Conditions Of Use; Applied Regulations And Standards - Handicare Hippo Bedienungsanleitung

ISO standard
7176-7 (Dis 1998)
7176-7 (Dis 1998)
7176-7 (Dis 1998)
7176-7 (Dis 1998)
7176-5
7176-10 (down)
(1999)
EN12184
Appendix A
7176-5
ISO 7176-14
N/A Not applicable
na Not available
min/max Concerns setting limits. If fixed value, only "minimum" is entered,
and at "maximum" ----
The wheelchair meets the requirements of the following standards:

Static, impact and fatigue stability according to ISO 7176-8,

Drive and control systems for electric wheelchairs according to
ISO 7176-14,

Climate test according to ISO 7176-9

Fire-resistance requirements according to ISO 7176-16.
4.2

Physical conditions of use

To the Hippo applies ambient temperature
-10 to +40 degrees Celsius, suitable for Dutch climate
4.3

Applied regulations and standards

This wheelchair has been provided with the CE mark. This means that this wheelchair
meets the current applicable European health and safety guidelines. In the
"Declaration of Agreement" (see page Fout! Bladwijzer niet gedefinieerd.) these
guidelines are indicated.
The "Declaration of Agreement" also contains the standards that were applied.
In addition, the wheelchair meets:

GQ (Certification Requirement R-06 of the KBOH).
Arm-rest height
Arm-rest depth
Hoop diameter (outer diameter bent part)
Horizontal location of rear axle (in relation to
intersection RLG)
Minimum radius (total diameter)
Capacity to take obstacles (down)
Maximum obstacle (free space underneath
wheelchair)
Turning space
Speed-control system operating power
Specifications
Hippo
Min Max
[mm] 165 245
[mm] 70 na
[mm] N/A N/A
[mm] N/A N/A
[mm] 1000 ----
[mm] 80 ----
[mm] 70 ----
[mm] 1000 ----
[N] 1,5 ----

Yes

Yes

Yes

Yes
39