Maintenance, Servicing And Dismantling; Maintenance And Servicing; Preparation - Elmo Rietschle V Serie Originalbetriebsanleitung

8

MAINTENANCE, SERVICING AND DISMANTLING

DANGER
DANGER
WARNING
CAUTION
NOTE
For a description of the safety instructions, see Chap. 2.9.
If maintenance work requires the dismantling of protective devices, these may only be dismantled for the
duration of the maintenance work. Immediately after completion of the maintenance work, all protective de-
vices must be fully installed in the designated position and checked for proper functioning. The prescribed
inspection intervals for protective devices must be observed and complied with. Protective devices may only
be maintained, replaced and serviced by trained, instructed and authorised specialist personnel.
Safety-related parts of the pump could be damaged or disabled by unauthorised tampering or manipulation.
Unauthorised tampering and manipulation of the safety-related parts of the vacuum pump, adjustable com-
ponents, is strictly prohibited and must be reported immediately to the responsible department.
8.1

Maintenance and servicing

As a prerequisite for safe and proper operation, it is essential that the pump is inspected, serviced and
maintained by suitably qualified personnel at regular intervals.
The service life of the pump stands and falls with regular maintenance. Other factors are to be found in the
operating conditions to which the pump is exposed. In unfavourable conditions, it may be necessary to sig-
nificantly reduce the maintenance intervals and the time of inspection.
8.2

Preparation

The responsibilities for installation, operation, maintenance and cleaning must be clearly regulated and defi-
ned.
For maintenance and servicing measures, it must be ensured that sufficient space is available for all work.
The maintenance area must be secured.
The following steps must be observed when preparing for servicing and maintenance work:
1 All existing electrical equipment must be individually disconnected. Maintenance during operation or
when the pump is switched on is strictly prohibited.
Prematic AG, Märwilerstrasse 43, 9556 Affeltrangen www.prematic.ch
Danger to life due to electric shock
Danger to life due to defective, dismantled and manipulated protective devices
Danger from hot components
Contamination and damage to the environment by operating materials
MAINTENANCE, SERVICING AND DISMANTLING
www.elmorietschle.com © Gardner Denver Schopfheim GmbH
Tel. 071 918 60 60, Mail: v-g@prematic.ch
27
|