Variant 4 - Bulk Pay-Off Pack With Unreeling Device - Fronius Timetwin Digital Bedienungsanleitung

Variant 4 - Bulk
pay-off pack
with unreeling
device
(12)

Variant 4 - Bulk pay-off pack with unreeling device

(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
Area of application
Variant 4 - "Bulk pay-off pack with unreeling device" - is often used for applicati-
ons with soft welding wires such as aluminium and aluminium alloys, copper and
copper alloys, and for wires for MIG brazing.
Other configuration possibilities
-
-
-
-
(8)
(11) (9) (10)
(2) (2)
(1) (3) (3) (1)
TPS 4000 power source (2x)
+ optional LHSB link (2x)
+ LHSB connector cable (1x)
+ software enablement (2x)
+ software-update from Fronius databank (2x)
Base stand (2x, bolted)
FK 4000 R cooling units (2x), each with optional rate-of-flow watchdog
VR 4040 unreeling device for bulk pay-off packs, (2x)
VR 1500 robot wirefeeder (2x)
Robacta Twin 500 welding torch (1x)
Robacta Drive Twin torch-hosepack (1x)
Standard interconnecting cable (2x)
Twin DeviceNet field-bus robot interface (1x, on one power source)
LocalNet cable as a connection between the two power sources (1x)
Field bus (1x)
Robot control (1x)
no base stands
power source and cooling unit on PickUp trolley (2x, only in conjunction with
FK 4000 R cooling unit, strain-relief must be provided for the LHSB connec-
tor cable)
2 x FK 4000 R cooling unit instead of FK 9000 R
for all types of interfacing to the robot control
(8)
(5) (5)
(4) (4)
(7)
(7)
(6)
93