Fronius TimeTwin Digital Bedienungsanleitung Seite 92

Robot
control
Variant 3b - Compact spool in enclosed wirefee-
der housing, bolted base stands, twin-head
mount
(9)
(10)
(11)
(12)
If you use Variant 3 - Compact spool in enclosed wirefeeder housing - it is im-
portant to ensure easy access to the wirefeeders for reloading and servicing
them:
-
-
Area of application
Variant 3 - "Compact spool in enclosed wirefeeder housing" - is often used for
applications with soft welding wires such as aluminium and aluminium alloys, co-
pper and copper alloys, and wires for MIG brazing. The enclosed wirefeeder
housing provides protection against soiling.
Other configuration possibilities
-
-
-
-
-
92
Welding torch
Remote-control cable (LocalNet, 2x)
Robot control (1x)
Robot interface Twin Standard I/O Synergic/Job (1x)
Cable connector to robot control (1x)
either by leaving sufficient space between them (Variant 3a) or
by using a twin-head mount with a swivelling wirefeeder fixture (Variant 3b).
no base stands
separate base stands (only in conjunction with FK 4000 R cooling unit)
power source and cooling unit on PickUp trolley (2x, only in conjunction with
FK 4000 R cooling unit, strain-relief must be provided for the LHSB connec-
tor cable)
2 x FK 4000 R cooling unit instead of FK 9000 R
for all types of interfacing to the robot control
(1) Base stand (2x)
(2) FK 9000 R cooling unit (1x,
Part 1 and Part 2)
(3) TPS 5000 power source (2x)
+ optional LHSB link (2x)
+ LHSB connector cable (1x)
+ software enablement (2x)
(6b)
+ software-update from Fronius
(6a)
databank (2x)
(4) Robacta Twin 500 welding torch
(1x)
(5) Robacta Drive Twin torch-ho-
sepack (1x)
(6) Swivel-mount - narrow (2x)
a) Swivel-mount - wide (1x)
b) Twin-head mount (1x)
(7) VR 7000 wirefeeder (2x)
(8) Standard interconnecting cable
(2x)