Switching Over From Timetwin; Possible Uses, Area Of Application - Fronius Timetwin Digital Bedienungsanleitung

If Twin interfaces are used, the solenoid valve is controlled directly via the Twin
interface.
If standard interfaces and fieldbus systems are used, the solenoid valve is con-
trolled via the robot control unit.
-
-
Switching over Switchover from TimeTwin Digital to single-wire is effected by Parameter t-C:
from TimeTwin
t-C
t-C
Possible uses, In the context of the "TimeTwin Digital" process, single-wire welding is used:
area of applicati- -
on -
-
80
Either pulsed or standard arc is possible
No need to change the welding torch
Power Power
source 1 source 2
On On
oFF oFF
for welding very tight radii
for welding in difficult positions and for out-of-position work
for filling in end-craters
Result
Power source 2 welds in single-wire process
Power source 1 welds in single-wire process